Show product


Pneumatic Measuring Gimbal / Floating Gages

The pneumatic measuring can be used in many areas of industrial production. The method and technique of pneumatic measurement is particularly characterized by the very high accuracy of 1.0 micron and very good stable Wiederholfähigkeit of 0.1 microns in a very short time. The Unaffected by the environment (dirt / temperature) makes it unnecessary to clean the parts to be measured to achieve with this method, a good reproducibility of the results.


Pneumatic measuring The pneumatic measuring is a non-contact measurement that protects the parts to be measured. Typical applications are measurements of diameter, length measurement between axes, measuring cone, eccentricity, pairing measurement etc are typical applications of this type of measurement.

The integration of pneumatic measuring equipment on automatic control machines or fully automated cells for quality control generally require that two conditions are respected.


  • a radial clearance (and possibly axially) of the measuring means to compensate for the uncertainty of the final location of the control member to be controlled.


  • stopping a function penetra which avoids the breaking of the measuring means in the case of difficulty or impossibility of the measurement.


  • The PFL - Group has several products in their solutions to solve these conditions easily.

Upfor AB

Regattagatan 8A
SE-723 48 Västerås
Phone: +46 (0) 21 150 160
© 2012 Upfor AB
Made by Northware